Woodstock Shop Fox M1112 Owner'S Manual Download

Page: 40 / 84

-38-

Model M1112 (For Machines Mfd. Since 12/20)

ATIO

Model M1112 Lathe Accessories

The following lathe accessories may be available through your local Woodstock International Inc. Dealer.

If you do not have a dealer in your area, these products are also available through online dealers. Please

call or e-mail Woodstock International Inc. Customer Service to get a current listing of dealers at: (360)

734-3482 or at [email protected].

The

Model M1066 Shop Fox Bull Nose Rolling Center

is constructed

for large, hollow workpieces like pipes, tubing and other material

that would “swallow” a regular live center. This MT#3 Bull-Nose

Center is designed for heavy-duty use. Although primarily designed

for metal lathes, our rolling centers also work well on wood lathes.

Don’t worry about dust getting in the bearings—they’re sealed!

The

Model M1068 Shop Fox Live Center Set.

A super blend of quality

and convenience, this MT#3 Live Center Set offers seven interchange-

able tips. High-quality needle bearings prolong tool life and special

tool steel body and tips are precision ground. Supplied in wooden box.

The

Model M1066 Shop Fox Heavy-duty Triple Bearing Live Center.

This Triple Bearing Live Center is hardened to a 61-65 Rockwell rat-

ing, and has a unique head driving mechanism that eliminates dust,

chips and coolant from entering the internal workings. Made with

high quality precision bearings, this MT#3 Live Center has an accu-

racy of 0.0003".

The

Shop Fox 6-Head Knurling Tools.

These versatile Knurling Tools

feature robust construction, self centering capability and lock knob.

Comes supplied with fine, medium and coarse knurls for forming dia-

mond patterns.

MODEL

SIZE

Knurl

M1094

⁄

" x

⁄

" x 5"

⁄

" x

⁄

" x

⁄

M1095

⁄

" x 1

⁄

" x 6

⁄

" x

⁄

" x

⁄

The

Model M1075 Shop Fox 20-pc. Carbide Tipped Tool Bit Set

. An

exceptional value for

⁄

shank carbide lathe tool bits! Twenty piece

sets offer tremendous savings over bits sold individually. Includes ten

C-2 grade bits and ten C-6 grade bits for cutting steel and alloys.

Summary of Contents for Shop Fox M1112





















































































Search results

Summary of Contents for Shop Fox M1112

Reviews:

Related manuals for Shop Fox M1112

Brands by name

Popular brands

Woodstock Shop Fox M1112, Owner'S Manual

Search results

Summary of Contents for Shop Fox M1112

Reviews:

Related manuals for Shop Fox M1112

Brands by name

Popular brands