Woodstock SHOP FOX M1011 Instruction Manual Download Page 4

Page: 4 / 16

-2-

INTRODUCTION

M1011 24" Pan and Box Brake

Woodstock Technical Support

We stand behind our machines! In the event that a defect is found, parts are missing or questions arise

about your machine, please contact Woodstock International Technical Support at 1-360-734-3482 or

send e-mail to:

[email protected]

. Our knowledgeable staff will help you troubleshoot prob-

lems, send out parts or arrange warranty returns.

If you need the latest edition of this manual, you can download it from

http://www.shopfox.biz

If you still have questions after reading the latest manual, or if you have comments please contact us at:

Woodstock International, Inc.

Attn: Technical Support Department

P.O. Box 2309

Bellingham, WA 98227

Your new

SHOP FOX

24" Pan and Box Brake has been specially designed to provide many years of trou-

ble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure

safe and reliable operation.

This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal

plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, and fix-

tures. When bolted to a secure workbench, your pan and box brake allows you easily bend 24" wide

mild steels up to 20 gauge (1mm) thick in a range of angles from 0˚ to 135˚. The removable and adjust-

able fingers can be installed in a variety of positions to accommodate for varying widths of metal.

Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our

intent to make sure all the information necessary for safety, ease of assembly, practical use and durabil-

ity of this product are included.

Specifications

Dimensions ................................................. 11" Tall x 30-11/16 Wide x 14" Deep

Working Height ..................................................................................... 9"

Maximum Steel Width ............................................................................ 24"

Maximum Steel Thickness ....................................................... 20 Gauge (1mm)

Approximate Pan and Box Brake Weight ................................................ 110 lbs.

About Your New 24" Pan and Box Brake

INTRODUCTION

Summary of Contents for SHOP FOX M1011

















Search results

Summary of Contents for SHOP FOX M1011

Reviews:

Related manuals for SHOP FOX M1011

Brands by name

Popular brands

Woodstock SHOP FOX M1011, Instruction Manual

Search results

Summary of Contents for SHOP FOX M1011

Reviews:

Related manuals for SHOP FOX M1011

Brands by name

Popular brands