Rev 3.0/7-15
3
FLEXR(L)-HV11AIR: #35036
SPECIFICATIONS
Description:
Designed for use with a crane or other hoisting equipment, the FLEXR(L)-HV11AIR
lifters employ vacuum to hold a load for lifting in the flat orientation.
Model Number:
FLEXR4HV11AIR
(w/4 Vacuum Pads)
FLEXR6HV11AIR
(w/6 Vacuum Pads)
FLEXRL6HV11AIR
(w/6 Vacuum Pads)
Load Capacity:
(rated at 16" Hg [-54 kPa] on clean, smooth, nonporous flat surfaces
1
)
Per-Pad:
300 lbs [136 kg]
300 lbs [136 kg]
200 lbs [91 kg]
Maximum:
1200 lbs [545 kg]
1500 lbs [680 kg]
1200 lbs [545 kg]
Lifter Weight:
100 lbs [46 kg]
125 lbs [57 kg]
145 lbs [66 kg]
Pad Spread:
----------------------------- (to outer edges) -----------------------------
Maximum:
41" x 70¼"
[104 x 178 cm]
41" x 70¼"
[104 x 178 cm]
41" x 105"
[104 x 267 cm]
Minimum:
23" x 54¼"
[58 x 138 cm]
23" x 54¼"
[58 x 138 cm]
23" x 61"
[58 x 155 cm]
Vacuum Pads:
2
10" [25 cm] nominal diameter, lipped (Model HV11), standard rubber, spring-
mounted (¾" [20 mm] travel), with #60 filter screen
Power Source:
Compressed air, 80-150 psi [550-1035 kPa] line pressure, 5 SCFM [142 liters/minute]
@ 80 psi [550 kPa]
Vacuum Pump:
Venturi type, 2.8 SCFM [79 liters/minute] nominal vacuum flow @ 80 psi [550 kPa]
Vacuum Reserve Tank:
Vacuum reservoir helps prevent immediate vacuum loss in case of power failure.
Vacuum Gauge:
Dial gauge indicates current vacuum level in positive inches of Hg and negative kPa.
Options:
See separate instructions about optional features.
Operating Elevation:
Maximum = 10,000 feet [3048 meters]
Operating Temperatures:
32° to 120° F [0° to 49° C]
Service Life:
This lifter is designed to have a service life of at least 20,000 lifting cycles, when
used and maintained as intended. Vacuum pads, filter elements and other wear-out
items are excluded; see MAINTENANCE and REPLACEMENT PARTS LIST for more
information. For the D
ISPOSAL OF THE
L
IFTER
after its service life, see INTENDED USE.
ASME Standard BTH-1:
Design Category "B", Service Class "0" (see www.WPG.com for more information)
!!–CE–!!
Note: This symbol appears in the
INSTRUCTIONS
manual only when requirements of a CE Standard are
different
from requirements of other standards that also apply to this vacuum lifter. CE requirements are mandatory
in geographical areas where CE Standards apply, but may be optional in other locations.
1
Load Capacity is based on a friction coefficient of 1; see MAINTENANCE: V
ACUUM
P
AD
M
AINTENANCE
: Friction Coefficient for
additional information.
2
Options include oil-resistant rubber pads for use on oily surfaces (see REPLACEMENT PARTS LIST).
Summary of Contents for FLEXR Series
Page 2: ......
