BA_WP_SPM2-1000_EN_28-22.docx
23
5
Machine Data
5.1
Technical Specifications
Size of the cast table top: L x W = 1000 x 550 mm
Size of the table extensions: L x W = 500 x 320 mm each
Size of the slide table: L x W = 1150 x 350 mm
Spindle center
slide table: 450 mm distance
Drive motor: 4.0 kW (5.5 HP) | optional 5.5 kW (7.5 HP)
Motor voltage: 400 VAC / 50 Hz
Protection class: IP54
Motor brake: electronic, wear-free
Spindle speeds: 1400 / 3500 / 6000 / 8000 rpm
Milling spindle: Ø 30 mm (on request: Ø 32, 35 ,40 and 50 mm)
Clamping height: 125 mm (with Ø 30 mm spindle)
Tool diameter (profiling) : max. Ø 180 mm at 90° | max. Ø 125 mm at 45°
Tool diameter (tenoning) : max. Ø 250 mm
Height adjustment stroke: 175 mm
Spindle tilt range:
90° … 45°
Height/Tilt adjustment: manually via handwheels
Height position indicator: analog indicator on handwheel
Tilt position indicator: analog angle scale on handwheel
Suction nozzles: 2 x Ø 120 mm (1 x on safety fence and 1 x on machine rear)
Net weight: approx. 400 kg
Space requirement: approx. 2800 x 2000 mm
Ambient conditions: refer to section
Name plate:
Figure 1: Name plate
Manufacturer:
HOKUBEMA Maschinenbau GmbH
Graf-Stauffenberg-Kaserne
Binger Str. 28 | Halle 120
DE-72488 Sigmaringen (Germany)
Tel.: +49 (0) 7571 / 755-0
Fax: +49 (0) 7571 / 755-2 22
Correspondence in the vase of service:
Please, in case of technical problems, contact your dealer
or the manufacturer's service department. In correspond-
ence or during a telephone call regarding the purchased
machine, you should have the following data at hand:
•
Manufacturer number of the machine
•
Voltage and frequency
•
Date of manufacture
•
Detailed description of the fault
•
Detailed description of the type of machining carried
out
•
General operating time of the machine in working
hours
•
In case of questions regarding the electrical system, the
information on the machine's type plate is also re-
quired.
