Safety & General Information
Engine/Motor Specifications
Safety & General Information
HDSdoc021716
1-17
1
1.10 Engine/Motor Specifications
See Table 1-5.
Engine/motor type specifications for the LT70 are shown below.
See Table 1-6.
The other motors used in sawmills LT70AH are listed below.
See Table 1-7.
See the table below for power supply specifications for the LT70 sawmill
Maximum Log Weight
2
4400 lbs. (1996 kg)
1
If your sawmill is equipped with a bed extension
option, add the length of this extension to the
sawmill length capacity (e.g. for BX12 add 12’).
2
Sawmills equipped with bed extensions can
accept heavier logs. A load must be distributed
uniformly on the frame and bed extension.
Maximal weight for BX6 extension is 500kg, for
BX12 – 1000kg, for BX24 – 2000kg. Failure to
do so may result in machine damage or serious
injuries.
Engine/Motor Type
1
1
Use diesel fuel for D42.
Manufacturer
Model Number
Power
Other Specifications
Electric Motor 25KM
2
2
The electric motors supplied on Wood-Mizer sawmills carry a rating assigned by the motor manufacturer
for the continuous duty operation of the motor, potentially, 24 hours per day, day after day. This rating is
useful in sizing motors for use in applications like blowers for heating and ventilation that are never cycled
off except for system maintenance.
Indukta SA,
Poland
Sg 160L-2
18,5kW
33.8 A, 2930 RPM
TABLE - 0-0
Model
Manufacturer
Voltage
Rated output
WM Part No
Power Feed Motor
Besel, Polska
3x230/
400V
1380 RPM - 1,1kW
090104
Up/Down Motor
Leeson, USA
3x230/
400V
1390 RPM -1,1kW
086530
Blade Guide Arm Motor
Motor Products
Owosso, USA
12V
60 RPM - 17W
P09698-1
Hydraulic Pump Motor
Besel, Polska
3x400V
1415 RPM - 4 kW
092258
TABLE 1-6
TABELA. 1-4
