12
Section 4 Initial Setup
Before testing, ensure the following procedures are followed.
Turn on the Meter
Press
to turn the meter on.
The meter will automatically turn off after 5 minutes of inactivity.
Coding the Meter
Each time a new box of test strips is opened, the new code chip included in the box must be
inserted into the meter. Compare the code number on the code chip with the code number
printed on the test strip packaging or the foil pouch. Results may be inaccurate if the two
numbers are not identical. Insert the new code chip into the code chip slot of the meter. The
code chip should remain in the meter. Do not take it out until a new box of test strips is
needed. The code number will appear on the Initial Screen after start-up.
If the code chip is not properly inserted into the code chip slot or if it is missing, the meter
will display E-6.
Summary of Contents for InSight Mini Chem
Page 1: ...User Manual...
