ty
il
Sa
fe
ra
Z2
5
W13
S6
S5
S1
W19
W8
Z6
S8
Round indentations
facing inside
Bolts at the lower part of S-Beams
should be screwed tightly, while the
upper part should be left loose to fit
Diagram1.2
Diagram1.2
Z6
W19
S5
110mm flathead bolt
Assembly Instructions MISSISSIPPI Pos. 505-D
Not all specifications cannot be guaranteed. © Copyrights by WOODLAND 1998
Safety rail Z23
screwed from inside
B17-B32
W16
W17
W3
W5
S1
S8
S7
W13
S6
S5
W23
W12
W10
W22
W-Beam sides with the most
indentations shold be placed
facing the inside of the bed!
W19
W8
Diagram1.1
Diagram1.1
Safety rail
Z26
Safety rail
Z26
Predrilled hole for
wall attachment
Safety rail Z24
screwed from outside
Z1
Z6
Z2
Z71
Z60
Ladder attachment next
to S5 or S1 possible.
2. Wooden parts, if necessary, can be treated with
wax or oil
before the assembly of the bed.
Advice:
We advise you not to treat the bed to sustain better environment for
children (regulating humidity in the air). In addition it saves wax and oil costs
and offers the advantage that it is easy to clean with tissues and cloth. Two
further benefits: Untreated wood is easier for childrens hands to grip and
the natural colour of the wood stays longer.
3. For the assembly of the bed you need the following
tools
:
a ratchet with a size ten socket, a cross-end screwdriver
(better yet a cordless
screwdriver
with a changeable head
and
size ten ratchet attachment
) and a
hammer
.
Assistance is only necessary when assembling the corner
beams of the bed.
1. Please take a moment to see how everything fits together
by using the diagram above. All the important building parts
have
stickers
to help you see how they fit into the overview.
Please note that there is a separate
beam list
as an
additional assembly aid. All beams are shown horizontally or
vertically as they should be positioned and assembled
together. The
labels
on the packages also help you to find
the content.
Lets begin:
The upper surface of the
mattress may not go over the
marking on the beam S1.
flange
nut M6
R
