ROOMETTES
MILLIE’S HOUSE #01-205-01 AND COMBO R4384
WOODLAND SCENICS
®
Distributed by
WOODLAND
®
• PO BOX 98, LINN CREEK, MO 65052 • M10 • woodlandscenics.com
DPM
®
LANDMARK STRUCTURES
®
HO SCALE BUILDING KIT
VICTORIAN COTTAGE #20500
WOODLAND SCENICS
®
Manufactured by
WOODLAND
®
• PO BOX 98, LINN CREEK, MO 65052 • N1 • woodlandscenics.com
Model making product. Not a toy! Not suitable for children under 14 years! / Produit pour le modélisme. Pas un
jouet! Pas adapté aux enfants de moins de 14 ans! / Producto para modelismo. No es un juguete! No adecuado
para niños menores de 14 años! / Modellbauartikel. Kein Spielzeug! Nicht geeigent für Kinder unter 14!
CAUTION: Cutting
tools recommended.
Use with care.
MODELING AND CARE INFORMATION This kit suggests the use of
materials that may stain or cause damage. Take care to cover project area
and clothing appropriately. Follow recommendations for use and cleanup.
INSTRUCTIONS
Follow the enclosed HO scale General Instructions for #100 and #200 series kits. The General Instructions will refer to the drawings and
instructions included with this kit. Read through all instructions before beginning construction on your kit.
Adhesive: Attach metal parts with cyanoacrylate adhesive (CA glue/super glue). Plastic parts can be attached with plastic cement or
cyanoacrylate adhesive.
Painting: Painting can be done either before or after the structure is assembled. If you paint before assembly, scrape paint from glue points
before gluing and touch up paint if necessary after assembly. Install Clear Window Material after painting is complete.
Wall Assembly: Work on a fl at surface. Use a squaring block to hold walls square while assembling. Butt ends of Walls 205-4 and 205-6 to
back of 205-5 (Fig. 1) and glue in place. Glue back of Wall 205-7 to ends of Walls 205-4 and 205-6. Butt back of Wall 205-2 to ends of Walls
205-1 and 205-3. Glue in place. Glue Walls 205-1 and 205-3 in grooves in Wall 205-4.
Roof Assembly: Test fi t Roof parts on building before gluing. Glue Roof Panels 205-8 and 205-9 together at peak, making certain that they
lay evenly on top of house walls (Fig. 1). Glue Roof Panels 205-10 and 205-11 together and test fi t in the “V” groove in Roof Panel 205-9.
Glue in place. Position Roof on Walls and glue in place.
Front Porch Assembly:
Test fi t all Porch pieces. Notch or trim pieces as needed to fi t fl ush with walls and trim. Bend Porch Posts straight if curved.
Glue Front Porch Floor 205-12 to Wall 205-1 and 205-4 fl ush with bottom edge of Walls. Using Porch Posts as a height guide, glue Front
Porch Roof 205-13 to Wall 205-1.
Glue Porch Posts 205-14 and 205-16 in place fl ush against Walls (Fig. 2). Glue Post 205-15 on corner of porch. Then, trim Porch Railing 205-21 to fi t fl ush between
Posts 205-15 and 205-14 (Fig. 2). Trim it so both ends are open and there are only 7 spindles. Glue in place. Then, trim both ends of Railing 205-22 up to the spindles
on each end, leaving 8 spindles. Glue Railing 205-22 fl ush with 205-15 Post. Butt the Post 205-17 up to Railing 205-22 and glue in place (Fig. 2).
Trim Porch Cornices 205-18, 205-19, 205-20 to fi t between Porch Posts then glue to Porch Roof 205-13.
Back Porch Assembly: Glue Back Porch Floor 205-23 to Wall 205-5 (Fig. 3). Glue Back Porch Brackets 205-25 and 205-26 to Wall 205-5, aligning Brackets vertically
with the door trim and slightly above the top of the door frame. Align Back Porch Roof 205-24 with Brackets and glue in place.
Chimney: Insert Chimney 205-28 in Skirt 205-27. Position Chimney (with Skirt) in chimney opening. Bend Skirt down to fi t fl ush with peak in Roof. If needed, fi le inside
of Skirt until Skirt fi ts fl ush over peak of Roof and Chimney sits level in chimney opening. Glue Chimney and Skirt in place on Roof (Fig. 4).
Electric Meter: Trim Electric Meter 205-29 wire conduit to fi t as needed. Glue Electric Meter 205-29 to Wall 205-6 (Fig. 5).
Gable Trim: Glue Gable Trim pieces 205-30, 205-31, 205-32 in peaks of Roof as shown (Figs. 5 & 6).
Weather Vane: Fit Weather Vane 205-33 to peak of house as shown (Fig. 6). Glue in place.
Create interest on your layout. Add lights to your buildings quickly and easily using the Woodland Scenics
®
Just Plug
®
Lighting System.
205-8
205-9
205-10
205-11
205-3
sand both
edges
205-1
sand both edges
205-4
sand both edges
205-6
sand both
edges
205-2
205-5
205-7
groove
groove
Fig. 1
Fig. 3
205-5
205-24
205-25
205-26
205-23
Fig. 4
205-27
205-28
roof
Fig. 6
205-30
205-31
205-33
205-12
205-13
205-2
205-16
205-20
205-7
205-17
205-22
8 spindles
205-15
205-21
7 spindles
205-14
205-18
205-19
205-4
Fig. 2
205-29
Fig. 5
205-6
205-32
Front
Back
