Woodland Mills Woodlander XL, Operator'S Manual

Page: 38 / 64

Woodlander ™ XL Operator's Manual
17. LIGHTING
Using the hardware listed below, install the light bar and country appropriate wire harness.
Secure tail lights to the light bar using M5 flanged lock nuts before mounting light bar to trailer.
Use cable clamps to secure wire harness to side plates down right-side of trailer. Tighten all
bolts. The M10 X 160 mm tongue bolts from the previous step can now be tightened after
wiring has been routed through the tongue.
On the European version, install the 4 side reflectors, 2 front reflectors, and 2 rear reflector
brackets and reflectors as shown on the following pages. There are no red/amber side lights on
the European wire harness like the ones included with the North American version.
4x
M8 X 25 mm
Flanged Hex Bolt
1x Light Bar
4x
M8 Flanged Lock
Nut
2x
Rear Reflector
Bracket
(Europe Only)
12x
M6 X 20 mm Hex
Bolt
2x
Rear Reflector
(Europe Only)
12x M6 Flat Washer 4x
Side Reflector
(Europe Only)
12x M6 Lock Nut 2x
Front Reflector
(Europe Only)
12x
M5 X 20 mm Pan
Head Screw
(4x Europe Only)
12x Cable Clamp
12x
M5 Flanged Lock
Nut
(4x Europe Only)
1x
Wire Harness
(North America
Only)
1x
Wire Harness
(Europe Only)
WDLRXL-MY2020: Rev A Page of 36 60 27-Sep-2019