WG24 Operator’s Manual
EQUIPMENT OPERATION
1.
Wear heavy-duty work gloves, ANSI-approved goggles behind a full face shield, steel-toed
work boots, and a dust mask.
2.
Securely attach the stump grinder to the tractor’s 3-point hitch system and install the PTO
shaft.
3.
Prior to each daily use, check all 34 teeth and ensure they are not loose, missing, or
damaged, and are torqued to the proper specification. Torque any undamaged loose teeth
to 160 ft•lb (215 N•m) using a torque wrench with a 24 mm socket.
4.
Remove the stabilizer pin prior to operation as shown below:
WG24-MY2019: Rev A
Page
of
16
28
22-Oct-2018
To avoid death or serious injury, do not grind stumps containing
embedded foreign objects such as nails, wire, metal fragments, etc.
WARNING!
Summary of Contents for WG24
