Bushlander
™
Operator’s Manual
TRAILER EXTENSION ASSEMBLY
**The
Trailer Extension Assembly
sections only apply to customers with Bushlander
TM
XL
trailer extensions.**
1. TRAILER EXTENSION TRACK
Using the hardware and components listed below, assemble the trailer extension track.
Assemble the trailer extension on wood blocks for ease of assembly. Assemble the log bunk
(middle) to the track rails using four (4) M10 X 25 mm hex bolts and M10 lock nuts. Assemble
the end bunk using four (4) M10 X 30 mm hex bolts and M10 lock nuts.
Do not fully tighten the hardware until it is squared as shown on the next page.
4x
M10 X 30 mm
Flanged Hex
Bolt
1x
Log Bunk
4x
M10 X 25 mm
Flanged Hex
Bolt
1x
End Bunk
8x
M10 Flanged
Lock Nut
2x
Track Rail
BHLR-MY2020-EN: Rev B
Page
of
29
56
20-Aug-2020
M10 X 25 mm
M10 X 30 mm
Summary of Contents for BUSHLANDER
