CUT THE SHORT/DEEP MORTISE LAST
Place the main body of the SOSS
hinge between the turret and the stop rod,
then adjust the stop rod so it's approximately
1/32" above the main body to set the
plunge depth for the short/deep mortise.
Loosen the two One Tracks and push
them into the Hinge Jig opening until they
bottom out and are visible. Tighten the
screws and cut the short/deep mortise in
1/4" deep incremental clockwise passes
until you reach the full depth of cut.
The debris generated during cutting will
interfere with the bushing travel in the Hinge Jig.
Clean out the debris between passes, making as
many passes as needed, until the cut is complete.
Clo
ck
wi
se
Ro
ute
r
Tr
av
el
Pa
th
Turret
Stop Rod
Main Body of
SOSS Hinge
Sh
or
t D
ee
p M
or
tis
e
