From Setup To Sanding:
These are the supplies we suggest you have on hand to com-
plete this pen kit:
15
/
32
" Pen Maker’s Bit Cap Blank
25
/
64
" Pen Maker’s Bit Body Blank
1 -
3
⁄
4
" x
3
⁄
4
" x 2" Cap Blank
1 -
3
⁄
4
" x
3
⁄
4
" x 2
1
⁄
4
" Body Blank
Pen Mandrel
Navigator Bushings
(146019)
Thick CA or 5 Minute Epoxy
Drill or Drill Press
Sandpaper/Micro-Mesh
Barrel Trimmer
Pen Press
Eye & Ear Protection
Dust Mask
Cutting & Drilling
Blanks:
Note: Additional length has
been added to the overall
length of the blank to ac-
commodate for squaring
the ends of the blank.
Gluing Blanks to Tubes:
Rough the entire surface of the tube using 180-grit paper.
Next, using either a thick CA or 5-Minute Epoxy, apply adhe-
sive to both the tube and the inside of the blank. To secure
the brass tube into the inside of the blank make sure to rotate
the tube as you insert it into the blank. This will help ensure
even coverage of the adhesive and a much more secure
bond.
Squaring the Blank to Length:
When squaring the blanks
to length work only to the brass.
Removing brass will affect the
overall length of the blank which is
critical to the proper operation of
the pen.
Mandrel Preparation:
77C05
7/30/2015
Product : #146018, #148851, #149177, #149909, #149910,
Product : #146018, #148851, #149177, #149909, #149910,
Product : #146018, #148851, #149177, #149909, #149910,
Product : #146018, #148851, #149177, #149909, #149910,
#149911, #149871, #147479, #147480, #147481, #147482
#149911, #149871, #147479, #147480, #147481, #147482
#149911, #149871, #147479, #147480, #147481, #147482
#149911, #149871, #147479, #147480, #147481, #147482
Navigator Rollerball &
Fountain Pen Kits
Woodcraft, 406 Airport Industrial Park, P.O. Box 1686, Parkersburg, WV 26102-1686
• 2014 by Woodcraft Supply, LLC. “Helping You Make Wood Work” is a registered trademark of Woodcraft Supply, LLC.
.535"
.535"
2
1
⁄
4
"
3
⁄
4
"
25
/
64
"
15
/
32
" &
25
/
64
"
Drill
3
⁄
4
"
Body
.481"
Sand
Cap
Body
15
/
32
"
3
⁄
4
"
Cap
2"
3
⁄
4
"
.481"
