ST James Slat Dining Table
WDC-SJA-48WH
Assembly Instructions
Step 1: Remove protective wrapping first. Then lay all parts on floor and identify all parts packed in
carton against attached parts list.
Step 2: Lay Table Top (A) upside down on floor, so bottom is facing up. Place a protective soft
material on floor before placing tabletop face down on floor.
Step 3: Then attach each of four legs (B) to the bottom as shown in Diagram 1, using Bolt (D) and
Washer (F) and Bolt cover(G). Attach Stretcher (C) to Leg (B) using Bolt (E) and Washer (F) and Bolt
Cover (G) as shown in Diagram 2.
Step 4: Make sure all bolts are aligned properly and tightened sufficiently. Then place bolt covers
over bolts. With a second person's assistance, turn the table over onto it's legs carefully, resting it
on flat floor surface. Put umbrella hole cover on top as shown in Diagram 3.
NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND
TIGHTENED PROPERLY AND SECURELY.
Diagram 1
Diagram 2
B
F
G
D
A
F
G
D
C
F
G
E
C
F
G
E
1 of 2
