background image

TRAVERS Dining Table 

WDC-TRA-4284

Assembly Instructions

Step 1:  Remove protective wrapping first.   Then lay all parts on floor and identify all parts packed 
in carton against attached parts list.

Step 2: Lay tabletop (A) upside down on floor, so bottom is facing up. Place  a protective soft 
material on floor before placing tabletop face down on floor.

Step 4: Make sure all bolts are aligned properly and tightened sufficiently.  Then place bolt covers 
over bolts.  With a second person's assistance,  turn the table over onto it's legs carefully, resting it 
on flat floor surface.  Put umbrella hole cover on top as shown in Diagram 3. 

Step 3: Then attach each of four legs (B) to the bottom as shown in Photo 1, using Bolt(D) and 
Washer (E) and Bolt cover(F). Attach Stretcher (C) to Leg (B) using Bolt (D) and Washer (E) and Bolt 
Cover (F) as shown in Diagram 2. 

NOTE: IT IS USER'S RESPONSIBILITY TO MAKE SURE ALL PARTS ARE ASSEMBLED AND 
TIGHTENED PROPERLY AND SECURELY.

Diagram 1

Diagram 2

E

F

D

A

B

D

E

F

C

Diagram 2

1 of 2

Reviews: