PG
7
OF
20
M0054.07 JULY 2019
Gas-Fired Tandoor CE
Installation and Operation Manual
GFT-35-CUS-CE (BARREL) SPECS
WS-GFT-35-CUS-CE (BARREL MODEL)
Air intake: Do not
facade or cover over
Shipping weight:
431 Kg
(750 lbs.)
UTILITY SPECIFICATIONS
Gas
12�7 mm (1/2") FBSPT inlet
See Gas Specifications on page
10 of this manual�
Maximum gas inlet pressure
34 mbar (1/2 psi or 14" W�C�)
Gas connection should be made using
an approved flexible connector and the
unit must be restrained in accordance
with all relevant local and national codes�
Gas connection is made beneath unit
at rear�
Venting
The Tandoor has been approved as a Type A appliance
and may be vented using an approved exhaust
hood� All exhaust system venting should meet the
construction requirements of a grease duct� The
Tandoor must be vented in accordance with all relevant
local and national codes, and in a manner acceptable
to the authority have jurisdiction� See Venting section
for further details�
Plan view
Side view
REV:
LEGEND:
PART #:
WS-GFT-3521-BRL
3521 - Barrel Tandoor
General Arrangement
7/30/2019
lucasm
3
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\001 Oven Main Stations\001-50 Dressed\35_Tandoor\WS-GFT-3521-BRL_General_Arrangement-3.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 3/4" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
34 1/2"
880mm
O
39 1/2"
1000mm
O
12"
300mm
Opening,
Lid Removed
16 1/4"
410mm
7"
180mm
34 3/4"
32 3/4"
880mm
830mm
Height Adjustable
11 1/2"
290mm
21"
530mm
21 1/2"
550mm
G
R 7"
180mm
Door Swing
Radius
Gas Connection
Made Beneath Unit
G
Adjustable Feet - 2" (50mm)
Front view
REV:
LEGEND:
PART #:
WS-GFT-3521-BRL
3521 - Barrel Tandoor
General Arrangement
7/30/2019
lucasm
3
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\001 Oven Main Stations\001-50 Dressed\35_Tandoor\WS-GFT-3521-BRL_General_Arrangement-3.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 3/4" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
34 1/2"
880mm
O
39 1/2"
1000mm
O
12"
300mm
Opening,
Lid Removed
16 1/4"
410mm
7"
180mm
34 3/4"
32 3/4"
880mm
830mm
Height Adjustable
11 1/2"
290mm
21"
530mm
21 1/2"
550mm
G
R 7"
180mm
Door Swing
Radius
Gas Connection
Made Beneath Unit
G
Adjustable Feet - 2" (50mm)
REV:
LEGEND:
PART #:
WS-GFT-3521-BRL
3521 - Barrel Tandoor
General Arrangement
7/30/2019
lucasm
3
DWN BY:
SHEET:
Bellingham, WA 360/650-1111 www.woodstone-corp.com
DIMENSIONS ARE IN INCHES
TOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°
UNLESS NOTED OTHERWISE
\\woodstone.net\dfs\CAD\0 Pn\001 Oven Main Stations\001-50 Dressed\35_Tandoor\WS-GFT-3521-BRL_General_Arrangement-3.dft
THE INFORMATION CONTAINED IN THIS DRAWING IS THE
SOLE PROPERTY OF WOOD STONE CORPORATION
ANY REPRODUCTION OR USE IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF WOOD STONE IS
PROHIBITED
AN ONGOING PROGRAM OF PRODUCT IMPROVEMENT
MAY REQUIRE US TO CHANGE SPECIFICATIONS
WITHOUT NOTICE.
DATE:
G
GAS INLET: 3/4" NPT
40,000 BTU, NG
40,000 BTU, LP
1 of 1
34 1/2"
880mm
O
39 1/2"
1000mm
O
12"
300mm
Opening,
Lid Removed
16 1/4"
410mm
7"
180mm
34 3/4"
32 3/4"
880mm
830mm
Height Adjustable
11 1/2"
290mm
21"
530mm
21 1/2"
550mm
G
R 7"
180mm
Door Swing
Radius
Gas Connection
Made Beneath Unit
G
Adjustable Feet - 2" (50mm)
Height Adjustable
32 3/4"
830mm
Adjustable Feet: + 2" (50mm)
