Wood-mizer TVS-FT Series, User Manual, Page: 51 / 116

MAINTENANCE
Miscellaneous Lubrication
MAINTENANCE 25doc031016 4-3
4
4.4 Miscellaneous Lubrication
1. Apply a thin film of a lithium grease to the saw heads width adjustment screw to help
prevent it from rusting.
2. Using the grease nipples, lubricate the chain drive shaft bearings, hold down roller
bearing of the infeed table, saw heads width adjustment screw bearing with a lithium
grease.
CAUTION! Never apply grease to the feed track chain.
It causes sawdust buildup in chain links.
See Figure 4-3.
3. If the TVS resaw is eguipped with Log Deck and/or Cross Transfer Deck, lubricate the
chain drive shaft bearings, using the grease nipples.
FIG. 4-4
50
50
50