Setup & Operation
Setwork controller setup for Stack mode
4
4-12
EGdoc013119
4.2.7
Setwork controller setup for Stack mode
To configure memory for the Stack mode, after selecting the STACK MODE function, press the STACK
SETUP button:
After that, the following screen will appear:
Use the arrows to select the program number (4 program memories are available) and the cutting position. Then
use the arrows under the SIZE field to set the desired value, and then press the SET button. The fields are filled
with the selected value – from the selected position upwards. Using the arrows next to the POSITION field, you
can move to next or previous positions.
Select decimal
values
Selection of unit
values
Summary of Contents for Titan WB2000-EC
Page 1: ......
Page 2: ......
Page 30: ...Setup Operation Sawmill Setup 4 4 4 EGdoc013119 FIG 4 3 WB2000 hes_017_A Lifting brackets...
