SAWMILL ALIGNMENT
Saw Head Tilt
5
5-31
doc092506
SAWMILL ALIGNMENT
5.18 Saw Head Tilt
As the blade enters a wide log or cant, the outside of the saw head will drop down slightly.
To compensate for the drop, use the lower track roller horizontal nuts to raise the outside
of the saw head 1
.
5 mm (0.06").
1.
Move the cutting head so the blade is positioned 375 mm (14.76") above a bed rail.
2.
Adjust the lower track roller horizontal nuts until the blade measures 376 mm (14.80")
from the bed rail near the outer blade guide.
See Figure 5-29.
FIG. 5-29
Stop Bolt
20_014
Lower
Roller
Adjustment
Nuts
