Assembly
Optional Blade Clamp
Assembly
CBNdoc080917
2-16
2
Optional Blade Clamp
A wider clamp is available separately (Kit #060190) that can be adjusted for 1”, 1 1/4”,
1 1/2”, 1 3/4” or 2” wide blades. Remove the nut on each rest bolt and move the bolts to
one of the five sets of holes in the clamp plates.
See Figure 2-14.
Use the upper set of holes for 1” blades, the next set of holes for 1 1/4”
blades, the third set of holes for 1 1/2” blades, the fourth set of holes for 1 3/4” blades and
the bottom set of holes for 2” blades.
FIG. 2-14
Lock Nut
Blade Rest Screw
Chose hole location
for blade size
SH0047