Troubleshooting Guide
Engine/Motor and Drive Pulleys Alignment
5
5-6
doc063022
Troubleshooting Guide
5.4
Engine/Motor and Drive Pulleys Alignment
1.
Install the drive belt.
2.
Use a straight edge to align the engine/motor pulley to the drive pulley. Also check that
the engine pulley is within 1/8" square with the drive pulley. Loosen the engine mounting
bolts and rotate the engine if necessary.
3.
Check front-to-back movement of the engine does not exceed 6,5 mm 1/4". Tighten the
motor mount U-bolts if necessary.
4.
Adjust the drive belt tension to 11mm deflection with 7,2 kg. of force.
5.
Recheck the pulley alignment and engine squareness with the clutch handle engaged.
Adjust if necessary.
6.
Adjust the drive belt support to 6mm from the belt while engaged.
