MAINTENANCE
Filling Blade Tensioner Cylinder with Oil
4
4-22
25doc063022
MAINTENANCE
4.14 Filling Blade Tensioner Cylinder with Oil
1.
Loosen the blade tensioner completely.
2.
Unscrew the oil pressure gauge.
3.
Using an oiler equipped with a tube / hose, top up the oil level until the oil flows out of the
cylinder.
IMPORTANT!
The cylinder needs to be filled with MOBIL
DTE 10 Excel 32 Hydraulic Oil (#WM part number:
P12825
).
IMPORTANT!
When topping up the oil level, make sure
that the end of the oiler tube / hose is at the bottom of the
cylinder.
4.
Wait 5 minutes. If the oil level does not lower, move on to the next step. If the oil level low-
ers, top up the oil level until the oil flows out of the cylinder.
!
!
