SAWMILL ASSEMBLY
Bed Frame Assembly
SAWMILL ASSEMBLY
15doc121912
2-8
2
3.
Using a forklift truck or a winch with lifting capacity of minimum 500 kg, carefully lift the saw head and set it
aside. Then attach the winch hook to the bracket on the saw head.
WARNING!
When removing the saw head, use extreme care and keep all
persons at a safe distance. Failure to do so may result in serious injury or
death.
See Figure 2-1.
2.3
Bed Frame Assembly
IMPORTANT!
With all screw joints without split lock washer or lock nylon
nut, use the "LOCTITE 243" (blue, of average durability, for screw joints).
1.
Mount preliminarily the track rail as shown in Figure 2-2. Do not tighten the nuts.
FIG. 2-1
500kg
!
