Specifications
Sawdust Extractor Specifications
specifications
EGdoc031120
5-3
5
See table 5-4
Other specifications of the EG800 edger are given below.
TABLE 5-4
5.3
Sawdust Extractor Specifications
See table 5-5
See the table below for specifications of a sawdust extractor that can be used with the
EG800 edger.
1
TABLE 5-5
IMPORTANT!
The sawdust extractor hoses must be grounded or made
with materials not accumulating electrostatic charge.
CAUTION!
Always turn on the dust extractor before starting the machine.
3. The total value of hand-arm vibration the operator may be exposed to does not exceed 2.5 m/s
2
. The highest
root mean square value of weighted acceleration to which the whole operator’s body is subjected does not exceed
0.5 m/s
2
.
Number of blades
6
Blade diameter
400 mm
Blade Rotational Speed
2950 r.p.m.
Cutting speed
0 - 40 m/min
Minimum board length
1000 mm
Minimum board thickness
12 mm
Maximum board thickness
107 mm
Minimum cutting width
60 mm
Maximum cutting width
600 mm
Maximum material width
640 mm
Airflow
1200 m
3
/h
Inlet diameter
200 mm
Motor Power
4 kW
Number of sacks
2 pcs
Sack capacity
0.25 m
3
Pressure drop
1,5 kPa (0.22 psi)
1
1
The pressure drop between the inlet of the capture device and
the connection to the CADES should not exceed 1.5 kPa (for the
nominal air flow rate). If the pressure drop exceeds 1.5 kPa the
machine might not be compatible withconventional CADES.
Weight
110 kg
Recommended conveying air
velocity in the duct
20 m/s
1. External chip and dust extraction equipment with fixed installations are dealt with in EN12779:2016-04.
!
