General Information & Safety
Diagnostic & Setup
General Information & Safety
SISdoc052814
1-12
1
1.12 Diagnostic & Setup
To enter the DIAGNOSTIC/SETUP menu, press the MENU button. Press the UP arrow
once, and push ENTER to confirm. Use the UP and DOWN arrows to switch options.
The following options are available in the DIAGNOSTIC/SETUP menu:
Raw A/D value -
technical specifications.
Current Zero Cal. -
technical specifications.
Right Index Prox -
indicates the right indexer proximity sensor status: ON or OFF.
Left Index Prox -
indicates the left indexer proximity sensor status.
Indexer Home Prox -
indicates the indexer cam proximity sensor status.
Cam Home Prox -
indicates the drive cam proximity sensor status.
Linear Sensor Adjust -
indicates the linear sensor adjustment status.
, for the adjustment procedure.
System Tooth Counter -
indicates the total number of blade teeth processed. The bot-
tom line shows the last four digits of the number. The upper line shows the first digits of
the number. Example: High Count 3, Low Count is 2117 - 32.117 teeth have been pro-
cessed.
Push the ENTER button after selection is complete to check the option status.
1.13 Power Supply Specification
The power supply must meet the specifications given below.
Voltage
Fuse [A]
Suggested Wire
Size
230 VAC
2 A
1.5 mm at least
TABLE 1-6
