46
3.6 GPS
This GPS section has the function to show the current position of the device. The purpose of this feature is to display
the location of each device if there is device installation in large number. It could help the technician to track the
device location. WoMaster GPS feature is supported with the
Global Navigation Satellite Systems use satellite
technology to provide insight on the geographic location of connected devices. GNSS is an inclusive term for the
category of global systems including GPS, GLONASS, BeiDou, and Galileo. Modern positioning and timing modules
have evolved to take advantage of multiple GNSS constellations at once. Combining multiple satellite systems
improves availability of signals, gives operators more access, and increases accuracy. Recent driving tests combining
GPS and GLONASS showed a noticeable improvement in both precision and performance when compared with
single system results. Whether user is navigating a position in a crowded city, a vast desert, or a dense forest,
utilizing multiple GNSS systems can help the device stays connected and centered.
3.6.1 GPS STATUS
The first configuration page is GPS Status, where user can see all of the GPS information such as the GPS Status, Date,
UTC, Latitude, Longitude, Altitude (m), Speed over ground(Km/h) and the Number of satellites.
The description of the columns is as below:
TERMS
DESCRIPTION
Status
Display the GPS interface status OK or Disabled
Date
Display the current date.
UTC
Display the Coordinated Universal Time (UTC)
Latitude
Display the latitude of the coordinate
