30
Link
Display the Ethernet status, whether it is Link Up or Link Down.
Speed/Duplex
Default: N/A
Show the Speed/Duplex for each port, such as 10 full,10 half,100 full,100 half mode
for
Giga Ethernet Port 1~2 (ge1~ge2)
Click on
Reload
to update the information.
3.2.2 ETHERNET SETTING
Use this page to configure the Ethernet setting such as the Host Name, Network Mode and the speed / duplex for the
Ethernet port.
The description of the Ethernet Setting page is as below:
TERMS
DESCRIPTION
Host Name
Give a name to identify the device.
Network Mode
Default: Bridge
Select Bridge mode or Router mode depends on the application.
When the Router mode is selected, then the device will change to
router mode and the interface for port 1 would be WAN interface and
port 2 would be LAN interface.
