ONE (1) TERMINAL WIRING
FIG. #3
3. For vehicles where the
factory horn wire
connects to only one (1)
horn terminal. Transfer
the factory horn wires to
your new Wolo horn. It
doesn’t make a
difference which horn
terminal is use when
transferring the wire
from your factory horn.
4. Using the grounding
wires supplied, place
the loop end under
each of the mounting
bolts of the horn and firmly tighten. Make sure the horn’s mounting bracket is secured to a metal body
surface that is clean of paint and rust.
5. Attach each of the grounding wires female terminals, to the unused terminal of each horn. IMPORTANT:
always make sure that there is a 15-amp fuse used in the horn circuit to protect the vehicle. Installation is
complete. If the wire terminal that was connected to your vehicle’s factory horn doesn’t connect to your
new Wolo horn, 1/4” push-on insulated terminals are provided in the kit.
WARRANTY
Wolo Manufacturing Corporation (“Wolo”) warranties to the original purchaser, for three months from the
date of purchase, that this product is free from defects in workmanship and materials. If there is such a
proven defect, Wolo, at its option, will either repair or replace the item free of charge, if it is returned to
Wolo within three months from the date of purchase together with proof of purchase as described below.
Wolo reserves the right to inspect any defect prior to settling any warranty claim by repair or
replacement. This warranty is limited as above provided and Wolo will not be responsible for fire or other
casualty or accident, due to neglect, abuse, abnormal use, modifications, faulty installation of this
product, or natural causes.
ANY EXPRESSED WARRANTY NOT PROVIDED HEREIN IS EXCLUDED AND DISCLAIMED. THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE ARE
EXPRESSLY LIMITED TO A TERM OF THREE (3) MONTHS. UNDER NO CIRCUMSTANCES SHALL
WOLO BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY OR OTHERWISE.
To obtain warranty service, return the product prepaid, and include the original bill of sale showing the date of
purchase. Provide with the return a brief description of the problem. Also, include with the return a check or
money order in the amount of $10.00 to cover return shipping. Mail to:
Wolo Manufacturing Corp.
One Saxwood Street, Deer Park, NY 11729 Attn: Warranty Service
E-mail: [email protected]
© 2008 Wolo Mfg. Corp. All Rights Reserved
