~
121
~
B
EFORE YOU OPERATE THE APPLIANCE FOR THE FIRST TIME
:
a)
set the water softener consumption (s. chapter 4.1.3 S
ETTING OF THE WATER
SOFTENER CONSUMPTION
.
b)
pour 500 ml water into the container of the water softener and pour in the water
softener (= dishwasher salt); s. chapter 4.1.1 F
ILLING OF THE WATER SOFTENER
CONTAINER
et seq.
c)
pour in the rinse aid (s. chapter 4.2.1 F
ILLING OF THE RINSE AID CONTAINER
).
d)
use suitable dishwasher detergent (s. chapter 4.3 D
ISHWASHER DETERGENT
et
seq.).
4.1 Water softener (= dishwasher salt)
NOTICE!
Use a water softener (= dishwasher salt) which is
suitable for
dishwashers
only
. Other water softeners and salts, especially table salt,
will damage the water softener container.
NOTICE!
Whenever you fill water softener into the dedicated container,
water will escape which contains dissolved salt. This water as well as not
dissolved salt particles will cause corrosion. When refilling water softener,
you always must initiate a complete cleaning programme immediately
after. RISK OF CORROSION!
Any damage caused by corrosion is not
covered by the guarantee.
NOTICE!
Water softener (dishwasher salt) causes corrosion unless you
activate a cleaning programme immediately after the filling of the
dedicated container. Corrosion can damage the appliance beyond repair!
The manufacturer is not liable for any damage caused by corrosion
due to improper operation.
RISK OF CORROSION!
❖
You must fill in the water-softener manually; please use the water-softener filler
hole. Open the lid and pour approx. 1.5 kg of water-softener into the container;
then close the lid properly.
4.1.1 Filling of the water softener container
NOTICE!
You must refill the container when the water softener indicator
(
«
»)
goes on. As long as the water softener has not dissolved, the
water softener indicator can also light up when the container is full. If you
have spilled water softener during filling, you can set a special soaking
programme to wash out any residues.