46
2.2 Water inlet / drainage installation
❖
Connect the cold water connection hose with a 3/4-inch thread connection and
make sure that it is securely tightened on both sides.
Once on the cold-water
connection and on the device itself.
❖
Make sure not to kink or crush the inlet hose. Do not use a used inlet hose.
❖
The inlet hose must not be shortened or damaged because it contains live parts.
❖
Connect the inlet hose with the hose screw connection to a water tap with an
external thread (3/4 inch).
❖
Check the tightness of the connections on
both sides
!
1.
The water inlet and drainage installation must be carried out by a qualified
professional.
2.
Use brand-new hoses and connector kids only.
3.
We recommend to secure the water supply with a back pressure valve.
Water inlet hose (for cold water)
Connect the inlet hose to a connector with a 3/4-inch
thread firmly and securely. When the hoses are new or
were not used for an extended period of time, let the
water flow until the hose is clear of any contamination.
NOTICE!
Otherwise, the water inlet may be blocked
and the appliance will be damaged
.