WM8510-EV1M
w
Rev 1.1 April 2006
16
REGISTER WRITE CONTROL PANELS
Figure 5 Register Write Control Panel
If the WM8510_EV1S software is opened before the WM8510_EV1B board is connected to the USB
cable the device will not be recognised automatically, pressing the ‘Re-detect’ button will establish a
software link to the WM8510 device. The ‘USB Device Connected’ indicator shows communication
with WM8510 EVB USB interface, but does not confirm correct operation on the WM8510 device.
Suitable device setup text files can be loaded or saved in the ‘Text Box’.
Pressing the ‘Write Register’ button will cause the hexadecimal value shown in ‘Write Register Data’
to be written to the WM8510 register selected by the ‘Register Index’ control. Once committed the
details of the register write will be recorded in the ‘Text Box’.
The software interface can also be used in ‘Standalone Mode’, which allows text files to be loaded or
saved in the ‘Text Box and File Handler’ window without communicating with the WM8510 device.
Select ‘None (Standalone Mode)’ to enable this mode.
Figure 6 Standalone Mode Selection
Summary of Contents for WM8510-EV1M
