WolfPack 4K IP Streaming Extender
8
4. System Connection
4.1
Usage Precaution
Make sure all components and accessories are included before installation.
The system should be installed in a clean environment with proper temperature and
humidity.
All of the power switches, plugs, sockets, and power cords should be insulated and
safe.
All devices should be connected before being powered on.
4.2
Connection Type
There are five types of possible applications:
Extender (Point-to-Point)
In a point-to-point configuration, there is no need for a switch. Distribute full,
uncompressed data up to 4K@60Hz 4:4:4 resolution as well as 1G Ethernet, audio and
control signals over a single copper or fiber cable.
Splitter (One-to-Many)
With only one IPA transmitter and one 10G Ethernet
s
witch, any A/V signal can be
flawlessly and instantly distributed to a near limitless number of receivers and screens,
any number of times.
Matrix Switcher (Many-to-One, Many-to-Many)
The combination of switching and splitting enables a completely scalable matrix
system. Independently route video, audio and RS232 control signal from any source to
any endpoint. The IPA allows for on-the-fly upgrading and a virtually unlimited number
of I/O ports.
