11
No.
Name
Description
1
USB port
Connect to the switcher or laptop for pairing up or projecting screen.
2
LED Indicator
Blinking:
When connected to the switcher: USB Dongle is being pairing up with the switcher.
When connected to the computer: USB Dongle is starting or is establishing connection
with the switcher.
Solid on:
When connected to the switcher: USB Dongle is paired up with the switcher successfully.
When connected to the computer: USB Dongle is connected to the switcher successfully.
You can press the button to start for screen projection now.
3
Projection
Button
Press the button to project laptop
’
s screen on the display.
Note:
USB Dongle is sold separately.
Steps to share laptop
’
s screen on the display using USB dongle:
1. Pair USB Dongle with the switcher.
Connect USB Dongle to USB Type A of the switcher for pairing up. Then the switcher will set
its soft AP
’
s SSID and password for USB dongle. Once pairing is done,
“
Pairing succeeded
”
will appear on the display screen.
2. Connect USB Dongle to a laptop.
Connect USB Dongle to the laptop, it will start running and connecting to the switcher
’
s soft
AP. Once the Dongle connects to the switcher successfully, the USB Dongle LED stops
blinking and turns to be solid on.
3. Now press the USB Dongle button, you can share your laptop
’
s screen on the display screen
immediately. Hold press the button for at least 5 seconds, you can have your laptop
’
s
screen displayed in full screen.
Guide Screen
The switcher uses a Guide Screen to convey the basic connection instructions for user access.
The Guide Screen can be personalized to allow custom connection instructions on the
switcher
’
s Web UI page.
The Guide Screen is accessible in the following cases:
• Automatic switching: disconnect all video sources from the switcher, the Guide Screen will
appear automatically.
