Mounting instructions for Wolfman and Backroads Moto
Top rack
KTM 690
PART # RTR8
This kit contains the following:
Rack is designed to work with the stock tail light assembly if
you have a tail tidy you will need longer spacers
Tools required:
10mm End wrench
4mm Hex wrench
6mm Hex wrench
¾ Drill bit or step drill
Drill
Read and understand these instructions prior to installation
Be sure to tighten all bolts
Properly installed Top rack for KTM 690
1.
Remove rear fender, turn over and drill out the four dimples in the under side to ¾
inch so that the four mounting holes are accessible.
Quantity Description
1
Top rack
1
Under mount bracket
4
8mm x 60mm Socket head
3
6mm x 20mm Flat head
4
8mm Washer (small)
3
6mm Washer (small)
3
6mm Nuts
4
Spacer 5/8 x 1”
