Wolf DO30F, Design Manual

Page: 104 / 114

Wolf Pro Ventilation
104
ELECTRICAL REQUIREMENTS
Wolf pro ventilation hoods and liners require a separate,
grounded 120 V AC, 60 Hz power supply. The service
should have its own 15 amp circuit breaker.
RECIRCULATING INSTALLATION
Low-profile, 24" (610) and 27" (686) deep wall hoods with
an internal blower (600 CFM or less), 30" (762) and 36"
(914) widths only, can be used in a non-ducted application
with a recirculating filter. In this installation, kitchen air is
purified through filters and returned as clean air into the
room. A recirculation kit available through your authorized
Wolf dealer is required.
CUSTOM HOOD APPLICATIONS
Wolf pro hood liners are for use in custom hood applica-
tions. The decorative hood can be created out of wood,
plaster, tile or metal. The shape of the hood is not critical.
The hood and liner must fit together at the bottom edge in
both width and depth. The height of the liner does not
have to match the height of the decorative hood.
Planning Information
Pro ventilation hoods and liners are recommended for use
with all Wolf cooking appliances. Wall hoods should be at
least as wide as the cooking surface, and island hoods
should be larger than the cooking surface by 3" (76) on
each side.
IMPORTANT NOTE:
For optimal performance in wall hood
applications, a pro 27" (686) deep wall hood is recom-
mended for use with ranges and rangetops that contain a
charbroiler or griddle.
All pro ventilation hoods and liners are shipped without the
blower assembly. Internal, in-line and remote blowers are
available through your authorized Wolf dealer. The blower
will vary in size and is dictated by the cooking unit, the
volume of air that needs to be moved and the length of the
duct run. Refer to ventilation recommendations on pages
109–110.
Pro hoods have a 10" (254) round duct. Low-profile hoods
have an adjustable discharge. All other pro hoods are
vertical discharge. For the 24" (610) and 27" (686) deep
wall hoods, a horizontal discharge kit is available through
your authorized Wolf dealer.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
Optional stainless steel duct covers in a variety of heights
are available for all pro wall and island hoods through
your authorized Wolf dealer. For local dealer information,
visit the show-room locator section of our website,
wolfappliance.com.