MOTUS®C14 Operating Instructions
Page
45
of
73
94 762 000 B
Revision 03.2022
English.
Safety regulations / installation notes
5.1 Content EU-Declaration of Conformity
Manufacturer: Wöhner GmbH & Co. KG, Mönchrödener Straße 10, 96472 Rödental, Germany
The valid EU-Declaration of Conformity can be found in the download section linked to the
product code on the Wöhner Homepage,
https://www.woehner.com
5.2 Safety regulations and installation notes
•
When working on the device, observe the national rules and regulations for electrical safety
•
Not observing these safety regulations may result in death, serious injury or equipment
damage.
•
During operation, voltage is present on the device.
•
This device may only be started up, assembled, modified or retrofitted by an authorized
electrician. Operation should only be carried out in a suitable electrical cabinet.
•
Before working on the device, disconnect the power.
•
For safety-related applications, secure the device using access protection.
•
Safety data can be found in this documentation and in the certificates.
•
Install the device in an appropriate cabinet with a suitable degree of protection.
•
Do not subject the device to mechanical and/or thermal loads that exceed the specified
values according to IEC/EN 60529 for protection against mechanical or electrical damage.
•
Install the device as specified in the installation instructions. Access to circuits inside the
device is prohibited.
•
Do not attempt to repair the device. Repairs may only be carried out by the manufacturer.
The manufacturer is not liable for damage as a result of non-compliance.
•
Only use power supply units with safe isolation and SELV/PELV in accordance with EN
50178/VDE 0160 (SELV/PELV). This prevents short circuits between the primary and
secondary circuits.
•
The minimum allowed Load Current: 2,6 A-device:
≥ 100 mA; 6,6 A-device: ≥ 100 mA
5.3 Area of application
•
This is a product for environment A (industrial). The device can cause unwanted radio
interference if used in Class B environments (household). If the product is used in Class B
environments, additional measures may be required.