Table des matières
43
EN
8
Hold measurement
Fig. 6: Hold mode
•
With the measurement view active, press the
Ξ
key a second time to enter hold mode.
•
„Hold" flashes in the upper left corner of the
display.
•
Press the ▲
-key to display the four frozen
measured values (CO
2
, temp., dew point, rela-
tive humidity) one after the other in the main
display.
•
Press the ● key
to exit the hold mode and
return to the measurement view.
or
•
Press the
Ξ
-key to exit the hold mode and
enter the general settings menu.