Wohler AMP1-16V-MD, User Manual

Page: 66 / 142

8 2 1 6 9 7 : A M P1 -1 6 V S e r i e s U s e r G u i d e
© 2 0 1 3 Wo h l e r Te c h n o l o g i e s , In c . A l l r i g h t s r e s e r ve d .
58
Ch a p t e r 5 E ff ic i en c y E nh a n c e m e nt s
Co p y i n g P r e se t s t o A no t h er M o ni t o r
2. Press the Hot Key Menu button to display the Main Screen Hot
Key Button Configuration Menu
.
3. To select a button to define, press that button to highlight its name.
4. Press the Balance knob to display the Label Menu .
Copying Presets to Another Monitor
If you have purchased more than one AMP1-16 Series monitor, you
may want to copy your presets from one monitor to another one. If so,
follow the instructions below.
Preset Files
A preset file contains all eight presets, and all other saved settings of the
current system configuration (whether saved as a preset or not) of an
AMP1-16 Series monitor.
Hot Key
Naming
Example
In this example we will rename
Button 8
to match the functionality
we just defined in the previous example.
1. On the
Main Screen Hot Key Button Configuration Menu
,
press Button 8 (bottom, right-hand side). The name field should
be highlighted.
2. Press the Balance knob to display the Label Menu .
3. From here, continue on with the instructions in the Label Example
on page 53 since the instructions for using the Label Menu are
identical.
Important: Verify that you have, in fact, saved your configurations to presets. See
Saving Presets on page 52 for details.
USO
RESTRITO