Original instructions GMF-E
Page 21 of 32
B0834
7.4 Power supply and powering-up
7.4.1
Motor
Important!
Compare the indications of the local voltage supply with the
technical data of the pump unit.
Important!
Lay the mains cable that way to prevent any unintentional
tearing off.
Important!
Skilled electricians are the only ones allowed to intervene in
electrical installations according to DIN VDE 1000-10.
Connect the pump unit to the voltage supply.
Before starting-up, double-check the installation for correct electrical connection.
Warning!
There is danger to life when intervening into the electrical installations!
Skilled electricians are the only ones allowed to intervene in electrical
installations according to DIN VDE 1000-10.
7.5 Start-up
The function of the pump unit was checked in the workshop. Thus, the pump unit is ready for
use and can be connected to the local power supply system.
Important!
Observe the s
afety instructions in section “Power supply and
powering-up
”.
Actions to be taken for start-up:
a) Filling the pump
unit with lubricant
Operate the pump unit with clean oil or grease from OEM-containers only!
