Original instructions GMF-E
Page 19 of 32
B0834
6.7 General safety regulations and duties
In general, using the pump unit the following safety regulations and duties are
to be complied with:
Consider the generally accepted rules for labour safety. This is also true, in
addition, for the current basic rules on labour safety and accident prevention
on the site of operation.
When used in vehicles, obey to the generally accepted rules and
regulations of the Road Code.
As user comply with the regulations for the usage of working equipment.
Operate the pump unit in clean and faultless state only.
Never remove, modify, bridge or neglect any protection, safety and
monitoring equipment, in no case.
Do not reconstruct or modify the pump unit.
Report faults or damage to the user.
For repair, incorporate original spare parts only.
The user has to inspect and maintain in good condition all the protection,
safety and monitoring equipment on a regular basis.
After each repair, make sure that the pump unit is in faultless state and
take a test run.
6.8 Exclusion of liability
If damage to persons, equipment, environment and assets occurs due to ignoring this
operating manual regardless if intentionally or unintentionally, WOERNER shall not be held
responsible. No claim for warranty will be accepted. This is also true for any consequential
damage.
