_________________________________________________________________________________________
www.wnt.com
XND.00016.022_A - 04/2018
22
3
Description of the clamping device
The MNG plate has been designed for mounting in a stationary position on machine tables of
vertical or horizontal machining centres.
The following components can be clamped using the zero point clamping system:
clamping devices such as machine vices, single or multiple pallets and unmachined parts.
Standard application using two alignment bolts
One or several MNG plates
Fit two or several MNG alignment bolts with a centre
distance of 200 mm into the components to be clamped
Single pallet fitting with MNG round:
1 No. MNG console
1 No. MNG clamping bolt
2 No.Ø12 m6 cylinder pins fitted in the component to
be clamped.
The cylinder pins must not protrude more than
max. 7 mm in order to be able to benefit from the 90°
indexing of the base plate.
When adapting the alignment bolts and indexing cylinder pins directly into a part to be
processed, it should be taken into account that the flatness of the base plate bearing surface
is max. 0.1 mm.