24 / 37
□
Normal
□
Intern
al Use
Confidential □ Re
stricted Confidential
User Manual
2.8.5.
I2C Interface
Adding pull-high resistors to 1.8 V through the 2.2 kΩ resistors is recommended.
Figure 9. I2C connection (example)
2.8.6.
UART Interface
There are two UART interfaces: One is a 4 bit UART for high-speed data transfer, and the other is a 2 bit
UART for diagnostic tools and debugging.
Figure 10.
UART connection (example)
