67
User Manual WMF espresso
Care | Manual cleaning
6.4.7 Clean the housing
• There is a risk of causing scratches or scoring.
> Do not clean with scouring powders or the
like.
> Use only very mild cleaning agents.
> Do not use any severely alkaline, alcoholic,
or degreasing cleaning agents.
> Use soft cloths for cleaning.
> We recommend a damp microfiber cloth.
Clean the housing at regular intervals using suitable
materials.
Press the ON/OFF switch briefly (approx. 1 second)
Allow the coffee machine to cool
Once the coffee machine has cooled down, clean
the housing with a damp cloth
Clean the sensor with a clean, damp cloth
6.4.8 Clean the steam nozzles
Burn hazard / scalding hazard
• When dispensing beverages and steam, hot
liquid comes out of the spouts. The adjacent
surfaces and spouts become hot.
• Hot water and steam may escape from the
outlets in the heating-up phase.
> When dispensing beverages and steam, do not
reach beneath the spouts.
> Do not reach beneath the spouts during the
heating-up phase.
> Do not touch the spouts immediately after
dispensing.
> Always place a suitable receptacle underneath
when dispensing.
IMPORTANT
Follow the Warranty chapter
w
Instructions
Consistency problems are associated
with alkaline cleaning agents,
solvents such as acetone, carbon,
carbon tetrachloride, paint thinner,
or alcohol compounds > 5 %,
ammonia, benzene, glycerine, xylol,
abrasives, degreasing flushing
agents, and strong spray cleaners for
glass are also not suitable.
Clean the display with a clean, damp
cloth. Do not use any cleaners or
implements.
CAUTION
