29
User Manual WMF espresso
Operation | Steam options
3.8.1 Auto Steam
Milk is heated or foamed using the Auto Steam option.
Foam button
Milk can be foamed to the set milk foam quality by
means of the foam button.
One milk foam quality level is available as a standard
setting.
After activating
Milk foam selection
, 3 individually
adjustable levels of foam quality are available for each
autosteam spout. The selection is shown on the display
after the foam button is pressed.
Potential milk foam qualities are:
• standard
• fine
• superfine
Milk button
Use the milk button to heat milk.
Heat milk or foam milk
Use as tall and slim a Cromargan® jug as possible,
with handle
Do not fill the jug above the halfway point, so that
the milk will not run over when it foams
Place the vessel in the centre under the steam
nozzle
The steam nozzle must be below the surface of
the milk.
Briefly touch the desired Auto Steam button
Steam is discharged, depending on the Auto Steam
button allocation.
Steam dispensing ends after reaching the set
temperature, or when the Auto Steam button is
touched again.
Put the jug away and press the Autosteam button
until steam flows out
Residues in the steam outlet are rinsed out.
After using the steam outlet, wipe off the outside
with a clean, damp cloth
Milk button
Foam button
Milk foam selection
w
System
page 50
Button allocation
w
Software
w
Change recipes
For example Cromargan® jug,
WMF order no. 03 9090 1001 pot set
