WMF 5000S+ Page 24 User Manual Download

Page: 24 / 120

User Manual WMF 5000 S +

Operation | Operation safety instructions

3 Operation

3.1 Operation safety instructions

Burn hazard / scalding hazard

• When dispensing beverages and steam, hot

liquid comes out of the spouts. The adjacent
surfaces and spouts become hot.

• Hot water and steam may escape from the

outlets in the heating-up phase.

> When dispensing beverages and steam, do not

reach beneath the spouts.

> Do not reach beneath the spouts during the

heating-up phase.

> Do not touch the spouts immediately after

dispensing.

> Always place an appropriate cup under the

spout before dispensing a beverage.

Health hazard

> Only use products that are suitable for

consumption and for use with the coffee
machine.

> The powder hopper, bean hopper, and

the manual insert may only be filled with
materials for the use intended.

CAUTION

Follow the Safety chapter

starting on page 5

CAUTION

Follow the Safety chapter

starting on page 5

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands