WMF 5000S+ Page 107 User Manual Download

Page: 107 / 120

107

User Manual WMF 5000 S +

Safety and warranty

9 Safety and warranty

9.1 Hazards to the coffee machine

Follow the manual

Failure to follow this and resultant damage will
result in loss of liability.
Follow the conditions for use and installation.

Installation location

• The installation location must be dry and

protected against water spray.

• Some condensate, water, or steam can always

be discharged from a coffee machine.

> Do not use the coffee machine outdoors.
> Set up the coffee machine so that it is

protected against water spray.

> Always place the coffee machine on

a water-resistant and heatproof base in order
to protect the installation surface against
damage.

Coffee grinder

• Foreign objects can damage the grinders.

Such damage is not covered under the
warranty.

> Ensure that no foreign objects land in the

coffee bean hopper.

IMPORTANT

Follow the Warranty chapter

starting on page 111

Conditions for use and installation

starting on page 15

Summary of Contents for 5000S+

























































































































Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands

WMF 5000S+, User Manual

Search results

Summary of Contents for 5000S+

Reviews:

Related manuals for 5000S+

Brands by name

Popular brands