WMF 1500S+ User Manual Download Page 22

Page: 22 / 120

User Manual WMF 1500 S +

Operation | Operation safety instructions

3 operation

3.1 operation safety instructions

Burn hazard / scalding hazard

•

When dispensing beverages and steam, hot
liquid comes out of the spouts. The adjacent
surfaces and spouts become hot.

> When dispensing beverages and steam, do not

reach beneath the spouts.

> Do not touch the spouts immediately after

dispensing.

> Always place an appropriate cup under the

spout before dispensing a beverage.

Health hazard

> Only use products that are suitable for

consumption and for use with the coffee
machine.

> The powder hopper, bean hopper, and manual

insert may only be filled with materials for
the use intended.

3.2 other documents

With syrup station option

•

Follow the User Manual for the syrup station.

•

Follow the Cleaning instructions for the syrup
station.

CaUtion

Follow the Safety chapter

starting on page 7

CaUtion

Follow the Safety chapter

starting on page 7

Summary of Contents for 1500S+

























































































































Search results

Summary of Contents for 1500S+

Reviews:

Related manuals for 1500S+

Brands by name

Popular brands

WMF 1500S+, User Manual

Search results

Summary of Contents for 1500S+

Reviews:

Related manuals for 1500S+

Brands by name

Popular brands