WMF 1100S User Manual Download Page 24

Page: 24 / 116

User Manual WMF 1100 S

Start-up | Start-up program

Unpack the WMF 1100 S and place the coffee
machine on a stable, horizontal surface

Observe the technical data

Plug the mains cable for the coffee machine into an
appropriate electrical outlet

3.3 Start-up program

Switch-on the coffee machine using the ON/OFF
switch

Coffee machine switches on.
The start-up program starts.

Follow all the instructions on the display

The start-up program provides a step-by-step
guide through the remaining start-up steps on
the display.

> Follow the display messages.
• The set values can be changed after start-up.

Additional instructions

• Connect up the milk

Chapter 4.6 page 28

As soon as the start-up program has run through
completely and all necessary adjustments have been
made, the coffee machine will restart. Calibration is
performed fully automatically.

Burn hazard / scalding hazard

• When dispensing beverages, hot liquid comes

out of the spouts. The adjacent surfaces and
spouts become hot.

> When dispensing beverages, do not reach

beneath the spouts.

> Do not touch the spouts immediately after

dispensing.

Technical data

page 108

IMPORTANT

Change settings

Software

starting on page 38

Start-up

CAUTION

Follow the Safety chapter

starting on page 7

Summary of Contents for 1100S





















































































































Search results

Summary of Contents for 1100S

Reviews:

Related manuals for 1100S

Brands by name

Popular brands

WMF 1100S, User Manual

Search results

Summary of Contents for 1100S

Reviews:

Related manuals for 1100S

Brands by name

Popular brands