wiwa DUOMIX PU280, Operation Manual

Page: 15 / 69

Translation of the original Operation Manual
3-2
•1307_PU280_SV1018DV1020_BAoDB_en•ski
en
Machine Description
The systems leave the factory in flawless condition and are appropriately packed
for transport.
➤
Upon arrival you should check the unit for any apparent transport damage.
➤
Please contact the WIWA customer service if you detect any damage on the
packaging or on the equipment.
➤
Disconnect the entire power supply for the machine, even for short transport
distances.
➤
Empty the machine before transport.
➤
Do not transport any other objects (e.g. material drums) while lifting or loading
the machine.
➤
Remove all loose components (e.g. tools) from the unit.
➤
Caution when loading with hoisting gear!
➤
Ensure sufficient load bearing capacity of lifting gear and lifting tackle
when loading the machine.
➤
Never stand under suspended loads or inside the loading area.
This poses a danger to life!
➤
You will find the dimensions and weights of the equipment on the machine
card.
➤
Secure the load on the transport vehicle against slipping and falling off.
➤
Parts or equipment that have been removed for transport purposes must be
attached professionally and in accordance with the intended use before com -
missioning.
➤
The DUOMIX PU 280 can be installed inside and outside spray
booths and rooms. However, outdoor installation should be preferred in order
to avoid contamination.
➤
The machine must only be taken into service under frost free weather condi -
tions, to avoid crystallization of material and thus damage to the equipment.
➤
This system requires a solid base and sufficient free space for safe operation.
The access to the safety features must be kept clear.
➤
Always keep the working area, especially all walkways and standing areas,
clean and tidy. Clean up spilled paint or cleaning agents immediately.
➤
Always ensure for sufficient aeration and ventilation at the workplace to avoid
damage to health and material objects.
Always observe the processing instructions issued by the material manufac -
turers.
➤
Protect a objects adjacent to the spraying object against possible damage
caused by the paint mist.
➤
The owner must protect the entire system by undertaking appropriate lightning
protection measures.
➤
Protect the equipment against rain and wetness. Do not store outside.
➤
Strictly comply with the valid accident prevention instructions.
3.4 Trans-
porting the
machine and
additional
equipment
3.5 Place of
installation of
the machine