Original operation manual
2K GEL UNIT
13
2KGel_14025_25015_BAoDB_en_1701 • rs
Safety
2.5 Operating and maintenance personnel
2.5.1 Obligations of the machine owner
The machine owner:
➤
is responsible for training the operating and maintenance personnel,
➤
must instruct the operating and maintenance personnel on correct handling
of the machine, and on wearing the correct work clothing and protective
equipment,
➤
must make work aids, such as e.g. lifting gear for transporting the machine
or container, available to the operating and maintenance personnel,
➤
must make the user manual accessible to the operating and maintenance
personnel and must ensure that this remains constantly available,
➤
must ensure that the operating and maintenance personnel have read and
understood the user manual.
Only then are they permitted to put the machine into operation.
2.5.2 Personnel qualifications
Differentiation is made between 2 groups of personnel, depending on their
qualifications:
➤
Instructed operators have received verified instruction from the machine
owner regarding the tasks entrusted to him and the possible risks if the
correct procedure is not followed.
➤
Trained personnel have received instruction provided by the machine
manufacturer and are capable of carrying out maintenance and repair work
on the machine, independently recognizing possible dangers and avoiding
risks.
2.5.3 Authorized operator
Activity
Qualification
Set-up and operation
Instructed operator
Cleaning
Instructed operator
Maintenance
Trained personnel
Repair
Trained personnel
Young persons under the age of 16 are not permitted to operate this
machine.
2.5.4 Personal protective equipment
Wear protective clothing
Always wear the protective clothing stipulated for your working environment
(e.g. antistatic protective clothing in potentially explosive areas) and also
observe the recommendations in the safety data sheet of the material
manufacturer.
